Ramsey Winch RPH-45000 (Mtg. Frame) User Manual
Page 8
Advertising
6
3. Remove brake assembly screws from brake #33 to access (2) mounting screws #17 attaching
brake to end bearing #8.
Caution: Brake is spring loaded by clutch spring and must be restrained
against end bearing as mounting screws are removed. Remove coupling #7 and gasket #35 from
end bearing. Take note of mounting configuration for proper mounting of parts during re-
assembly.
4. Remove winch from upright mounting frame #2 by removing (8) capscrews #15, (8) lockwashers
#22, and (4) shoulder bolts #27. Pull motor end bearing #8 from drum assembly #1.
8
BRAKE ASSEMBLY
SCREWS
33
7
17
17
35
1
27
OUTER-MOST
CAPSCREW
INNER-MOST
CAPSCREWS
OUTER-MOST
CAPSCREW
27
2
27
27
9
1
8
15
15
15 22
22
22
Advertising