Rapid-Air DUAL SWIVEL REEL: 100 & 1000 SERIES User Manual
Page 4
DANCER ARM LOOP HEIGHT ADJUSTMENT
Eight different loop sensing arm operating positions are selected manually during set-
up. By incrementing the thumbwheel height switch, the zero point of the dancer arm is
raised from it’s rest position to the angle shown (as indicated 0-7). The dancer arm will
move from rest position to the angle selected before the pallet reel begins to rotate.
DANCER ARM LOOP RANGE FUNCTION
30 degree - Loop sensing arm travels through a full 30 degree arc
to vary turntable rotation speed from slow to full speed as con-
trolled by % speed pot.
20 degree - Loop sensing arm travels through a 20 degree arc to
vary turntable speed from slow to full speed as controlled by %
speed pot.
10 degree - Loop sensing arm travels through a 10 degree arc to
vary turntable rotation speed from slow to full speed as controlled
by % speed pot.
5 degree - Only the first 5 degrees of loop sensing arm travel is re-
quired to control turntable rotation from slow through full speed as
controlled by % speed pot.