AudioSource Amp Seven T - Manual (Page 4)

Amplifier Power Output . . . . . . . .200 watts per channel
500 watts monobridged
Total Harmonic Distortion . . . . . . . . . . . . . . . . . .<0.04%
Intermodulation Distortion . . . . . . . . . . . . . . . . . <0.04%
Frequency Response . . . . . . . .20 Hz to 20K Hz, ±0.5 dB
Signal to Noise Ratio . . . . . . . . . . . . . . . . . . . . . .110 dB
Input Sensitivity . . . . . . . . . . . . . . . . . . . . . .0.8 V (Line)
Input Impedance . . . . . . . . . . . . . . . . . . . .30K
Ω
(Line)
Headroom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2dB
Functions . . . . . . . . . . . . . . Mono Bridging (Rear Panel)
Auto/Manual Power Switch (Rear Panel)
Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . .Line (RCA) In
Outputs . . . . . . . . . . . . . . . . . . .Speaker A (Left, Right),
Speaker B (Left, Right), Line Out/Thru (RCA)
Dimensions . . . . . . . . . . .16 1/2"W x 4"H x 13 1/4"D
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 lbs.
Design and specifications are subject to change without notice.
9300 NorthDecatur
Portland, OR, 97203
Tel. 503.286.9300
Fax 503.978.3302
[email protected]
www.audiosource.net
© 2000 AudioSource, Inc.
Amp Seven T Specifications