SaltDogg LS10 Liquid Spay System User Manual
Page 4
Advertising
4
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (800) 841-8003
www.saltdogg.com
5. Apply thread locker on threaded rods #3026587. Pass rods thru tank holes and screw them into
welded nuts. Leave rods sticking out about 1 inch from tank surface FIG 6.
APPLY THREAD LOCKER ON THREADED ROD.
ASSEMBLY THREADED RODS INTO WELDED NUTS,
LEAVING ABOUT 1 INCH EXPOSED.
Fig. 6
6. Insert retainer #3026545 into tank holes. Pass threaded rods thru tubes FIG 7.
INSERT RETAINERUPPER INTO TANK OPENINGS AS SHOWN.
PASS THREADED RODS THRU TUBES.
Fig. 7
Advertising