Progressive International Electronics FuelDirect - Manual (Page 3)

Port Selection Window
During the installation process, this Port
Selection dialog box will appear. Choices
for configuring FuelDirect for dispenser
channels and ATG are described below.
Each channel can handle up to 16 fueling positions (dispensers or card
readers). As an example, programming may begin with a dispenser on
channel 1, following this procedure:
1. For Type, select Pump.
2. For Com, select Ethernet.
3. For Brand, select dispenser brand.
4. For Ethernet Address, select PI DBox ethernet address for dispenser.
(Refer to DBox manual.) 192.168.0.200 is default DBox ethernet
address.
Dispenser Channel Selection