Progressive International Electronics FuelDirect - Manual (Page 4)

If using a card reader or second bank of dispensers, program under
Channel 2. Ethernet address cannot be the same as the one used for
channel 1. For example, the unique ethernet address may be
192.168.201. If additional banks are to be used, program remaining
channels in the same manner.
If connecting to automatic tank guage:
1. Under ATG, select Enable.
2. Under Com, select port to which tank guage is connected.
3. If tank guage does not use this port for reconciliation, check
TLS 250 only.
Automatic Tank Gauging
Click OK to exit this window. Click on Finish to complete programming.
Insert software key (supplied with FuelDirect package) into USB port. Key must
remain installed for FuelDirect to be fully operational.
Software Key