Progressive International Electronics PIcon Console - Manual (Page 34)

PIcon Program & Report
Rev 2.0 June 2006 Page 30
Mode 51 — Select Dispenser Type (Manager only)
To enter this mode from the M 0, mode number prompt, enter <51> on the keypad and press
<ENTER>. The default, indicated on the screen, is None Selected for dispenser type.
Select Pump — To select the dispenser brand, press <SELECT> to scroll through the
brands, stopping when your dispenser’s brand name appears.
Press <MNGR> to exit this mode. You will be prompted for the option of clearing memory
back to factory defaults. Press <CLEAR> to clear all totals or <MNGR> to decline this
option and exit the mode. The PIcon will reset.
Mode 60 — Pump Configuration (Manager only)
Pump specific, advanced configuration. To enter Pump Configuration mode from the M0,
mode number prompt, enter <60> on the keypad and press <ENTER>. Press <0>, <1>, etc.
on the numeric keypad to select the configurable item and then press <A/B> to toggle
between the options for the selected item.
Contact your dealer for assistance.
Mode 70 — ATG Activation (Manager only)
To enter Automatic Tank Gauging mode from the M 0, mode number prompt, enter <70> on
the keypad and press <ENTER>. Press <A/B> to toggle between Enable and Disable
selection. This mode available only on PIcons configured with AUX Port.