Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 6)

6
Connection with Peripheral Equipment (Specifications of the
GP3000H Direct Connect Cable)
The following GP3000H direct-connect cable (optional) is required.
• To connect the GP3000H conversion adapter, an additional connector cable is required. For
details, refer to “GP3000H Conversion Adapter Installation Guide”.
1. Connecting Peripheral Equipment
• Do not allow the cable's connector to drop or hit against anything hard, or the
connector could be damaged.
• Be sure to connect peripheral equipment first, and connect the GP unit last.
Otherwise, the RS232C/RS422/RS485 circuit may fail.
• Be sure to terminate unused wires to avoid short-circuits by other signals or metal
parts.
• After cable length adjustment, be sure to connect the shield on the cable to the FG
terminal.
„ Serial Interface
Name Model Description
GP3000H Hard-type 10m
Direct-connect Cable
GP3000H-CBLH-10M
Heavy-duty type interface cable for
communication between the GP and
external equipment (e.g. host
controller), equipped with common
mode filter.
GP3000H Soft-type 3m
Direct-connect Cable
GP3000H-CBLS-3M
Standard type interface cable for
communication between the GP and
external equipment (e.g. host
controller), equipped with common
mode filter.
GP3000H Soft-type 5m
Direct-connect Cable
GP3000H-CBLS-5M
GP3000H Soft-type 10m
Direct-connect Cable
GP3000H-CBLS-10M
Recommended Cable Connector XM2D-0901 <made by OMRON Corp.>
Recommended Jack Screw #4-40 (UNC) XM2Z-0073 <made by OMRON Corp.>
Recommended Cable Cover XM2S-0913 <made by OMRON Corp.>
Cable Color/
Marking Color,
Number
RS232C
*1
RS422/RS485
*1
Signal
Name
Description
Signal
Name
Description
Brown/White 1 CD Carrier Detect RDA Receive Data A(+)
Brown/Black 1 RD(RXD) Receive Data RDB Receive Data B(-)