Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 2)

2
Part Names and Functions
Name Description
A Status LED
B CF Card Access LED
Lit in green when the CF Card is inserted and the cover
is closed, or when the CF Card is being accessed.
C Power Connector (Socket) -
D USB Host Interface (USB)
USB1.1 Host I/F
Connector: USB TYPE-A x 1
Power supply voltage: 5VDC±5%
Output current: 500mA (max.)
The maximum communication distance: 5m
E Serial Interface (COM1) Dsub 9-pin plug type. RS232C is supported.
F Serial Interface (COM2) Dsub 9-pin plug type. RS422/RS485
*1
is supported.
*1 RS485 is compliant with ST-3400 series units with revision code “A” or later.
Revision (page 11)
G CF Card Cover -
H Dip Switches Located inside the CF Card Cover.
Front Rear Right Side Bottom
(CF Card Cover Open)
A
B
E
F
C
D G
H
LED
ST Status
Green (lit)
Normal operation (power is ON.) or
OFFLINE operation.
Orange
(blinking)
During software startup.
Red (lit) When power is turned ON.
Not lit Power is OFF.
SEE