Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 36)

File Selection Screen
PLC Ladder Monitor Operation Manual 3-7
OK
This reads the ladder programs onto a CF Card.
• The read button triggers saving of only ladder programs and comments
to the CF Card. It always reads and displays the latest numeric values
from the external device.
If you change the ladder programs or comments on the PLC after reading
the data of the external device to the CF card of the display, the Ladder
Monitor for the display will not be updated. Read the data again to update
the saved data.
Cache the ladder programs on the CF Card to increase the display speed
instead of reading data from the external device every time.
• To display the comment line, copy the comment file (***.ocm) into the
folder below the CF card.
When using CS/CJ Series HOST Link Driver: PLCLDMON\OMR_FINS
When using CS/CJ Series Ethernet Driver:
PLCLDMON\OMR_FINE
)
“3.2 File Selection Screen” (page 3-6)
When reading and displaying the comment information from the CF card
again, convert the comment file created with the Omron Corporation
programming tool, CXProgrammer, with the Digital Comment Editor
Tool.
)
“Start up procedure from the 2.2.2 Setup Procedure Step 6” (page 2-8)
For details on comment and ladder files, see below.
)
“3.2 File Selection Screen” (page 3-6)
/Cancel
This closes the file selection screen and returns to the previously displayed
screen.
Setting Description
Reading to a CF Card