Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 5)

PLC Ladder Monitor Operation Manual 4
Maker
Series
Name
CPU Model Link I/F
Connection
Method
*1
Driver Name on GP-
Pro EX (Version)
*2
OMRON
Corporation CP1
Series
CP1L-M
††
D
†
-
†
CP1L-L
††
D
†
-
†
CP1W-CIF01 RS-232C
CS/CJ Series
HOST link
(V1.13.02 or later)
CP1W-CIF11
RS-422/485
(4wire)
CP1H-X
††
D
†
-
†
CP1H-XA
††
D
†
-
†
CP1H-Y
††
D
†
-
†
CP1W-CIF01 RS-232C
CP1W-CIF11
RS-422/485
(4wire)
CJ1W-SCU41
CJ1W-SCU21
CJ1W-SCU41-V1
CJ1W-SCU31-V1
CJ1W-SCU21-V1
RS-232C or
RS-422/485
(4wire)
CJ1W-ETN21
*3
Ethernet
CS/CJ Series
Ethernet
(V1.14.03 or later)
*1 Communication mode changes according to type of link unit, cables used, etc. For
details, see the relevant driver manuals.
*2 The driver version can be checked by viewing [Peripheral List] in the [System Settings]
window on the GP-Pro EX, or [Driver Version] on [Offline Home] on the display.
*3 Compatible with both Ethernet transfer protocols, UDP/IP and TCP/IP.
• If the driver version of a device connected to the GP-Pro EX is older than
that indicated in the table, the ladder monitor will not function normally. You
must upgrade the driver to at least the version indicated in the table before
using the unit. For the update module, please download it from the Pro-face
support site “Otasuke Pro!”.
(URL http://www.pro-face.com/otasuke/)