Proface GP4100 - 3.4 Compact HMIs" - Manual (Page 8)

8
Isc = 0.7 A
Ca = 16 µF
La = 10 µH
2. Selected Associated Nonincendive Field Wiring
Apparatus shall satisfy the following:
3. If the electrical parameters of the cable are
unknown, the following values may be used:
Capacitance = 60 pF/ft
Inductive = 0.20 µH/ft
4. Nonincendive Field Wiring must be installed in
accordance with article 501.10(B) of the National
Electrical Code ANSI/NFPA 70.
5. Nonincendive Field Wiring Apparatus shall not con-
tain or be connected to another source of power.
• USB (mini B) Interface (USB2) is for temporary
connection only during maintenance and setup of
the device. Do not use, connect, or disconnect
unless area is known to be non-hazardous.
Connection or disconnection in an explosive
atmosphere could result in an explosion.
Digital Electronics Corporation
8-2-52 Nanko-higashi
Suminoe-ku, Osaka 559-0031
JAPAN
TEL: +81-(0)6-6613-3116
FAX: +81-(0)6-6613-5888
http://www.pro-face.com
The information in this document is subject to
change without notice.
Copyright © 2012.11 Digital Electronics Corporation.
All Rights Reserved.
Associated
Nonincendive
Field Wiring
Apparatus for
USB (Type A)
interface of the
GP-4100 Series
-
Nonincendive Field
Wiring Apparatus
Voc
≤
Vmax
Isc
≤
lmax
Ca
≥
Ci + C cable
La
≥
Li + L cable
Inquiry
Do you have any questions about difficulties with
your GP?
Please access our site anytime that you need
help with a solution.
http://www.pro-face.com/otasuke/
Please be aware that Digital Electronics Corpora-
tion shall not be held liable by the user for any
damages, losses, or third party claims arising
from the uses of this product.
Note