Proface PS4800 - 19 Panel PC" - Manual (Page 40)

Dimensions/Assembly
40
Industrial Personal Computer 15" Dimensions
NOTE: All dimensions shown in the outline diagrams are the same dimensions as
the Stainless Steel Bezel Model.
Overview
The illustration below shows the dimensions of the Industrial Personal Computer
15":
NOTE: No front USB for Stainless Steel Bezel Model.
Values
The following table shows the general tolerances for Industrial Personal Computer
dimensions:
Nominal Measurement General Tolerance acc. DIN ISO 2768
Medium
up to 6 mm (up to 0.236 in.) ± 0.1 mm (± 0.004 in.)
6...30 mm (0.236...1.181 in.) ± 0.2 mm (± 0.0078 in.)
30...120 mm (1.18...4.724 in.) ± 0.3 mm (± 0.012 in.)
120...400 mm (4.724...15.747 in.) ± 0.5 mm (± 0.02 in.)
400...1000 mm (15.747...39.37 in.) ± 0.8 mm (± 0.031 in.)