Proface APL3000B - Node Box PC User Manual
Page 69
Advertising
PS-3450A Series Hardware Manual
3-12
When attaching the HDD to the PS-3451A
(1)
Unscrew the screws (2) of the HDD cover and remove the HDD cover.
When replacing the cover, the torque required for these screws is 0.5 to 0.6N
•m.
(2)
Unscrew the screws (4) of the HDD unit, remove the cable connector from IDE I/F while lifting up the
HDD unit, and remove it. To replace the HDD unit, connect the cable connector to IDE I/F securely and
fix the HDD unit with the screws (4). The torque required for these screws is 0.5 to 0.6N
•m.
IDE I/F
PS-3451A Inside of the rear
Advertising