Proface FP3900 - 19 Flat Panel" - Manual (Page 6)

-6-
„ „ „ „ „ Structural
2 Specifications
Be careful when installing the Wall Mount Adaptor to check on the envi-
ronment where it will be used, especially the levels of vibration that will
be present. Certain conditions can lead to an amplification of small si-
multaneous vibrations to produce a large overall vibration. This could
result in the contents of the screen being difficult to read, or make the
screen hard to operate, which could, in turn, cause an accident. To avoid
this problem, either position the Adaptor in a location where vibration is
minimal, or attach vibration absorbing material to the wall.
CAUTION
• Prior to installing the Wall Mount Adaptor, be sure to consider the weight of
the Unit, the force required to place the Unit on the wall, and the wall mate-
rial when deciding on the size/strength of the attachment screws. This is to
prevent the Unit or the Adaptor from accidentally falling from the wall.
• Be sure when installing the Adaptor not to pinch your fingers.
• Be sure to check that you have installed all the attachment screws prior to
using the Adaptor. This is to prevent the Unit from accidentally falling.
3 Installation
WARNING
• Installing the Wall Mount Adaptor while power is supplied to the Unit may
lead to an electric shock. Prior to installing theWall Mount Adaptor, confirm
that the Unit's power supply is disconnected.
• Be sure to wear gloves, to prevent cuts or abrasions.
External Dimensions W90[3.54] x H92[3.62] x D13[0.51] mm[in.]
Weight Approx. 0.2[0.44] kg[lb.]