Proface FP3900 - 19 Flat Panel" - Manual (Page 8)

-8-
3) Hold the Unit firmly and place it over the Wall Mount Adaptor's Mounting
Tabs. The middle guide will help to position the unit.
4) The two (2) Set Screws at the bottom of the Adaptor are used to hold the
plates in place
Fastening torque: 0.5 to 0.7 N•m
Set Screws (2)
Guide
Mounting
Tabs
With PS-600G Series, PS-500P Series, GP-2500/2600 Series, FP-2500/2600
Series, and GLC2600 Series units, be sure to use these set screws.
© 2001 Digital Electronics Corporation. All rights reserved.
Note
Please be aware that Digital Electronics Corporation shall not be held
liable by the user for any damages, losses, or third party claims arising
from the uses of this product.
Digital Electronics Corporation
8-2-52 Nanko Higashi, Suminoe-ku, Osaka 559-0031, Japan
URL: http://www.pro-face.com/
Wall