3 installing a dimm – Asus A7N266-VM User Manual
Page 26
14
Chapter 2: Hardware information
2.5.2 Memory configurations
Install DIMMs in any of the following combinations.
DIMM Location
184-pin DIMM (DDR)
Total Memory
Socket 1 (Rows 0&1)
64MB, 128MB, 256MB, 512MB
x1
Socket 2 (Rows 2&3)
64MB, 128MB, 256MB, 512MB
x1
Total system memory (Max. 1GB)
=
Installing a DIMM:
1. Unlock a DIMM socket by pressing the retaining clips outward.
2. Align a DIMM on the socket such that the notches on the DIMM exactly
match the notches in the socket.
3. Firmly insert the DIMM into the socket until the retaining clips snap back
in place.
2.5.3 Installing a DIMM
CAUTION!
Make sure to unplug the power supply before adding or
removing DIMMs or other system components. Failure to do so may cause
severe damage to both the motherboard and the components.
Unlocked Retaining Clip
Locked Retaining Clip