A4hi] [`aut, Operation-system, Alarm 4 high – Watlow Series 988 User Manual
Page 83: Auto-tune
WATLOW Series 988 User’s Manual
5.7
Operation Menus, Chapter 5
Operation-System
Alarm 4 High
Select the high trigger value for the output 4 alarm.
[A4HI] This prompt appears only if [`AL4] (Output Menu) is set to some-
thing other than
[``no].
If
Default
↓
↓
highest
[`Pr1] or [`pr2]
[A4LO] …
value of
…
value of
[`AL4]
[`AL4]
[A4HI]
[`rH1]
(or
[`rH2])
sensor
(Output Menu)
(Input Menu)
range
[`dE1] or [`dE2] or [rAtE]
[```0] … [`999]
…
[9999]
[`AL4]
[`AL4]
[`AL4]
[A4HI]
[A4HI]
[A4HI]
(Output Menu)
Auto-tune
Initiate an auto-tune.
[Pidb] appears only on controllers with enhanced software (98_B-_ _ _ _-_
_ _) and with
[ALgO] (Global Menu) set to [Pid2] or [cscd].
[`AUt] This prompt always appears.
Default
↓
[`OFF]
[PidA]
[Pidb]
[`AUt]
[`AUt]
[`AUt]
[A4HI]
[`AUt]
NOTE:
For more informa-
tion on auto-tune
see Chapter 7.