Atlantis A02-PL303-WN - Manual (Page 50)

50
9.15 Administration -> Settings Management
These functions allow you to save a backup of the current configuration of your
device to a defined location on your PC, to restore a previously saved configuration,
or to restart your device with the factory default settings. This is useful if you wish
to experiment with different settings, knowing that you have a backup in hand in
case any mistakes occur. Besides, you can restart the device to factory default
setting after you have accidentally changed your settings that may result in
undesirable outcome.
 Export Settings:
 Click on Export to select where on your local PC you want to store your
setting file. You may also change the name of the file if you wish to
keep multiple backups. It is advisable that you backup your device
configuration before making any changes to your device
configuration.
 Import Settings:
 Settings file location: Click on Browse to select a file from your PC to
restore. You should only restore your device setting that has been
generated by the Backup function which is created with the current
version of the device firmware. Settings files saved to your PC should
not be manually edited in any way. Select the settings files you wish to
use, and press Import to load the setting into the device.
 Load Factory Defaults
 You may also reset your device to factory settings by holding the small
Reset pinhole button more than 2 seconds.