Atlantis A02-PL303-WN - Manual (Page 54)

54
address must match it. Refer to the chapter on remote
management for details.
6 If you changed the NetPower 303 WN LAN IP address, then enter
the new one as the URL.
The web configurator does not display properly.
Steps Corrective Action
1 Make sure you are using Internet Explorer 5.0 and later versions.
2 Delete the temporary web files and log in again.
In Internet Explorer, click Tools, Internet Options and then click the
Delete Files ... button.
When a Delete Files window displays, select Delete all offline
content and click OK. (Steps may vary depending on the version of
your Internet browser.)
A.4 Login Username e Password
I forgot my login username and/or password.
Steps Corrective Action
1 If you have changed the password and have now forgotten it, you
will need to upload the default configuration file. This will erase all
custom configurations and restore all of the factory defaults
including the password.
2 Press the RESET button for 3 seconds, and then release it.
3 The default username is “admin”. The default password is
“atlantis”. The Password and Username fields are case-sensitive.
Make sure that you enter the correct password and username
using the proper casing.
4 It is highly recommended to change the default username and
password. Make sure you store the username and password in a
save place.
A.5 LAN Interface
I cannot access the NetPower from the LAN or ping any computer on the LAN.
Steps Corrective Action
1 Check the Ethernet LEDs on the front panel. A LAN LED should be
on if the port is connected to a computer or hub. If the 10M/100M
LEDs on the front panel are both off, refer to Section A.1.2.