AEG KO-LAVAMAT 88830 - Manual (Page 19)

Instructions for use
19
Run a Washing Cycle
Brief Instructions
A washing cycle is run in the following steps:
0 1. Set the correct washing program:
– Set the program and temperature with the program selector
– Set any additional program(s)
2. Change the spin speed if necessary/select RINSE HOLD (SANS
ESSORAGE).
3. Set DELAY TIMER (DEPART DIFFERE) if necessary.
4. Open the filling door and fill with washing.
5. Close the filling door.
6. Add washing detergent/care agent.
7. Start the washing program.
After the Washing Program Ends:
Attention! If the washing cycle ended with Rinse Hold, before opening
the filling door carry out PUMP (VIDANGE), SPIN (ESSORAGE) or SHORT
SPIN (ESSORAGE DELICAT).
8. Open the filling door and remove the washing.
9. Switch off the washing machine: Set the program selector to OFF
(ARRET).