2 configuration - position, 1 servo parameters, Configuration - position -4 – Yokogawa YVP20S User Manual
Page 81: Servo parameters -4
Advertising
9-4
<Toc> <Ind>
<9. CONFIGURATION SERVICES>
IM 21B04C50-01E
9.2
Configuration - Position
This is the setup page for the valve position configuration parameters in Transducer (TB)
block.
9.2.1
Servo Parameters
The servo parameters are normally set by autotuning in Tuning of Calibration. They
determine dynamic response of the valve position control.
Figure 9.2 Configure Position
Advertising