Wiring procedure – Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 141
Advertising
2-24
IM 04L31A01-01E
Terminal Position
–
+
Transmitter power supply
output terminal
(4 sets of terminals)
Wiring Procedure
1. Turn OFF the power to the CX2000 and remove the option terminal cover.
2. Wire the transmitter power supply output cable to one of the transmitter power supply
output terminals.
3. Attach the option terminal cover and secure it with screws.
Note
To reduce noise, use a shielded cable for wiring. Connect the shield to the ground terminal of
the CX2000.
2.6 Transmitter Power Supply Wiring (/TPS4 Option)
Advertising