Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 180)

4-20
IM 04L31A01-01E
• Filter
Turn ON/OFF the input filter and set the time constant when input filter is ON in the
range of “1 to 120 s.” Note that the time constant of the input filter can be changed
during operation.
• Ratio (only when [Input type] is set to [RemoteSP]
To multiply a certain ratio to the remote input, set this value to [On] and set the ratio in
the range of “0.001 to 9.999.” Note that the ratio can be changed during control
operation. Note that the ratio can be changed during control operation.
4.6 Control input range