Yokogawa PC-Based MX100 - Manual (Page 175)

2-152
IM MX190-01E
CDAQMXConfig::setVOLT
Syntax
void setVOLT(int chNo,int iRangeVOLT,int spanMin = 0,int
spanMax = 0);
Parameters
chNo Specify the channel number.
iRangeVOLT Specify the range type of the DC voltage input.
spanMin Specify the span minimum.
spanMax Specify the span maximum.
Description
Sets the channel of the specified channel number to the specified range.
If the maximum and minimum values are the same, the span is considered omitted.
If the channel does not exist or the channel is not on the corresponding module, the
setting is void.
If the constant for “Specify all channel numbers” is specified for the channel
numbers, all channels are processed.
Reference
getClassMXChConfig getClassMXSysInfo
CDAQMXChConfig::setSpan
CDAQMXChConfig::setVOLT
CDAQMXSysInfo::getModuleType
CDAQMXSysInfo::getTempUnit
2.5 Details of the MX100 Class