ATEN CE-220L - Manual (Page 5)

- 3 -
Computers
The following equipment must be installed on each computer that
is to be connected to the system:
With PS/2 Type Connectors:
Š
A VGA, SVGA, or Multisync card
Š
A 6-pin mini-DIN mouse port
Š
A 6-pin mini-DIN Keyboard port
With AT Type Connectors:
Š
A VGA, SVGA or Multisync card
Š
A DB-9 (standard serial), mouse port plus mouse adapter
(part # 2A-105)*
Š
A 5-pin DIN (standard AT), keyboard port plus keyboard
adapter (part # 2A-106)*
* Not included - requires separate purchase.
Cables
Š
Although it is possible to use standard KVM cables to link
computers with PS/2 type keyboard and mouse ports to the
CE-220L, for optimal signal integrity, and to simplify the
layout, we strongly recommend that you use the high quality
CS Custom KVM Cable that is provided with this package.
Š
It is not possible to use standard KVM cables to link
computers with AT type keyboard and mouse ports to the CE-
220L. For those computers, CS Custom KVM Cables must be
used.
Š
Category 5 cable is the minimum required to connect the local
and remote CE-220 units. Cable of a lesser standard will
result in degrading the video signal. For best performance, we
strongly recommend Category 5 cable.
CE220.fm Page 3 Wednesday, November 22, 2006 10:55 AM