Thermolec Plenum Heater - Manual (Page 2)

THESE INSTALLATION INSTRUCTIONS COVER:
GENERAL NOTES
- Please refer to CSA Standard B139, installation code for oil burning equipment and to the Canadian Electrical Code,
Part 1, for recommended installation practices.
- The installation of this unit should be in accordance with the regulations of the authorities having jurisdiction.
CAUTIONS
1. Before installation, ensure that the local electrical inspection authority will accept connection of this equipment
to the existing panel.
2. This equipment may only be installed and tested by qualified personnel.
3. The electrical power supply should be checked for adequacy for the proposed additional load.
4. Ensure that the heat output capacity of the installed electrical Add-on Heaters does not exceed the rated output
capacity of the furnace burner.
5. This heater is for use with an in-line (hi-boy) or up-flow (lo-boy) oil or gas fired furnace.
OPERATING INSTRUCTIONS
The controls provided with this unit prevent simultaneous operation of the add-on heater and the oil burner. In the case
of malfunction, shut down the equipment and call a qualified electrician.
Page 1
MODEL
T-4 to T-30
(4 Kw to 30 Kw)