Pro-Cut Warthog User Manual
Page 70
Advertising
PG /
Ø70
800.543.6618
GYR TROUBLESHOOTING GUIDE
CONTINUED
PC will not print.
Check Wi-Fi connectivity. Any network issues should be reported to your internal IT
department.
ISSUE
TROUBLESHOOT
Thickness value of rotor does not change on screen.
1. Check wire connections on cutting head sensor.
2. Check 15-pin connector located on lathe computer for poor connection or damage.
3. Unplug lathe for 15 seconds.
4. Plug back in to reset connections.
ISSUE
TROUBLESHOOT
Advertising