Gige sample viewer and filter driver – Allied International GX1660C User Manual
Page 19
GX1660 User Manual
70-0057A-A
Allied Vision Technologies (Canada) Inc.
17
GigE Sample Viewer and Filter Driver
o
Download GigE Sample Viewer from
www.alliedvisiontec.com
. This will install the Sample
Viewer application program, drivers, and optionally the Prosilica Filter Driver. The Filter
Driver will improve CPU performance and is recommended.
o
Plug in the GX camera Ethernet cable(s) and power. Verify that the Green LED is a solid
green. Run Sample Viewer. It will take a few seconds for the camera to be recognized,
especially if your camera is in DHCP mode. If the camera does not appear after one minute,
see the Trouble Shooting section of this document.
o
In Sample Viewer, select the wrench icon to change camera settings. See the Camera
Controls Addendum for description of each setting. Select the eye icon to stream images. If
the camera is not imaging, see the Trouble Shooting section of this document.
Figure 1. GigE Viewer application window.