Allied International GX1660C - Manual (Page 31)

GX1660 User Manual 70-0057A-A
Allied Vision Technologies (Canada) Inc. 29
Camera Controls
Note: Not all features listed here are available on all camera models.
Acquisition
This group of controls relates to the acquiring of images.
Trigger
This group of controls relates to how an image frame is initiated or triggered.
AcqEnd
AcqEndTriggerEvent – What type of external input trigger will end acquisition.
EdgeRising – rising edge trigger
EdgeFalling – falling edge trigger
EdgeAny – rising or falling edge
LevelHigh – active high signal
LevelLow – active low signal
AcqEndTriggerMode – Selects if the end of acquisition should be stimulated by an external hardware
trigger. See the AcquisitionStop command for software triggering.
SyncIn1 – trigger at SyncIn1 to be associated with this control
SyncIn2 – trigger at SyncIn2 to be associated with this control
Disabled – an external trigger does not control end of acquisition
AcqRec
An AcqStart hardware trigger signal, or the AcquisitionStart command, must be received before your
AcqRec trigger. See AcquisitionMode = Recorder.
AcqRecTriggerEvent – What kind of external input trigger will start a recording sequence when
AcquisitionMode set to Recorder.
EdgeRising – rising edge trigger
EdgeFalling – falling edge trigger
EdgeAny – rising or falling edge
LevelHigh – active high signal
LevelLow – active low signal
AcqRecTriggerMode – Selects if the start of a Recorder event should be stimulated by an external
hardware trigger. There is no software trigger event capability for this mode.
SyncIn1 – trigger at SyncIn1 to be associated with this control
SyncIn2 – trigger at SyncIn2 to be associated with this control
Disabled – an external trigger does not control the start of a Recorder event
AcqStart
AcqStartTriggerEvent – What kind of external input trigger will stimulate the start of acquisition.
EdgeRising – rising edge trigger
EdgeFalling – falling edge trigger