MAHLE RTI MCX-2 (Rev A) - Manual (Page 12)

Page 11
SYS TEM
OFF
ON
SYS TEM VA CUU M
ON
EMP TY WAS TE
FILL
OFF
ON
TES T FILL
SYS TEM PR ESS URE
OFF
SYS TEM
DRA IN
Green Hose
EM
PTY WAS
TE
ON
OFF
OFF
OFF
FILL
Overflow
Radiator
Black Hose
Hose
Radiator
Wand
SYS
TEM
ON
FILL ON
TES
T
SYS
TEM
PR
ESS
URE
SYS
TEM
DRA
IN
Pump
Water
SYS
TEM
VAC
UUM
Block
Engine
Core
Heater
COMPLETING THE JOB
All used coolant in the vehicle cooling system has now been replaced with new
coolant. The following steps will complete the job.
1. Close the valves on the Step Adapters.
2. Disconnect the black and green hoses from the Step Adapters.
3. Install Wand on black hose. Close the valve.
4. Remove the cap from the radiator.
5. Press top of DRAIN SYSTEM selector switch to turn on pump.
6. Use the Wand to lower the level of coolant in the radiator to a level just below
the upper hose where the Step Adapter is attached. Open valve on Wand as
required.
Continued on next page . . .