Vcx-1, Top off, Flush radiator – MAHLE RTI VCX-1 User Manual
Page 12: Page 11
Page 11
NEW COOLANT
TOP OFF
EMPTY NEW TANK
FILL NEW TANK
FILL RADIATOR
EMPTY RADIATOR
FILL NEW TANK
HOME
VCX-1
EMPTY WASTE TANK
EMPTY RADIATOR
HOME
WASTE COOLANT
EMPTY WASTE TANK
TOP OFF
EMPTY NEW TANK
(PRESSURE)
HOME
(VACUUM)
Top Off
1.
Turn all panel valves to the Home position.
2.
Turn the Cone Adapter Valve to the closed
position.
3.
Turn all panel valves to the Top Off position as
shown in the illustration. This orientation can
also be obtained by positioning the panel valves
toward the blue highlights closest to each valve.
4.
Open the Cone Adapter Valve to fill the radiator
and overflow to the proper levels.
5.
Turn all valves to the Home position.
6.
Close the Cone Adapter valve when done.
7.
Replace radiator and overflow caps.
Flush Radiator
1.
The New Coolant Tank needs to be filled with water. See Empty Waste Tank and Fill New Tank
procedures.
2.
The Empty Radiator function must be run to completion.
3.
Run the Fill Radiator procedure.
4.
The Empty Radiator function must be run again to extract all of the water inside the cooling
system.
5.
Repeat steps 3 and 4 until the desired results are achieved. Once completed new coolant
needs to be added to the vehicle system.