MAHLE RTI CSC10 - Manual (Page 4)

- 3 -
Assembly
INSTALLATION OF SWIVEL CASTERS
Locate the 4 swivel casters and bag of hardware that were shipped in the Fill Bucket on top of the unit.
Verify that the hardware bag contains 8 bolts, 8 lock-washers, and 8 nuts.
Have a helper tilt the unit on its bottom edge to install each caster. Insert the bolt from the top, secure
the washer and nut on the bottom. Tighten with a 1/2" wrench or socket.
HAND PUMP ASSEMBLY
1. Remove pump from box.
2. Screw barbed hose assembly onto the pump outlet.
Attach the section of hose to the barb and tighten clamp.
3. Screw the extension tube to the bottom of the pump and
fully extend the tube.
4. Securely tighten packing nut at the top of the pump
to prevent leakage.
5. Screw pump into large opening on supplied 15 gallon
Clean Coolant Drum.