Avaya 3600 Series - Manual (Page 23)

Avaya Inc. Desktop Charger, Dual Charger, and Quad Charger User Guide
Desktop Chargers
3616 WT 3626 WT
In DCE100 Desktop Charger in DCX100 Desktop Charger
Overview The Desktop Charger is a one-slot charger. Model DCE100 is
designed to charge the BPE100 Battery Pack in the 3616 WT
and the BPN Battery Pack in the 3620 WT. Model DCX100 is
designed to charge the BPX100 Battery Pack in the 3626 WT.
The models are not interchangeable.
Full charging is accomplished in approximately one and a half
hours.
Set up the Desktop Charger by first obtaining the appropriate
Avaya power supply for the country or region. Place the
Desktop Charger on a flat, horizontal surface. Plug the power
supply into the Desktop Charger and into an appropriate wall
outlet.
The user must end any call in progress by pressing the End Call
button on the WT before placing the handset into the Desktop
Charger. The WT may be off or in standby mode during
charging.
Indicator light Place the WT into the Desktop Charger slot facing forward. If
the WT is placed correctly, the red indicator light will come on.
The indicator light will not come on when the slot is empty,
when the WT is improperly seated, or when the Desktop
Charger has no power applied.
Charging indicator While the WT is charging in standby mode, it will display
its extension number and
Charging…. The battery icon will
show charging progress. The handset is fully operational
and will ring if called. When the WT is charging while
turned off, only
Charging… will display and no calls will
be received. The dots will be racing during the charging cycle.
It is normal for the Battery Pack to become warm when
charging.
21-300632, Issue 1, July 2005 Page 23