PreSonus FIREstation - Manual (Page 12)

6
2.7 Stand-Alone Mode (Special ADAT Mode)
MIXER SPDIF
-80 +10
6
PHONES MAIN OUT
dB
0
0 12
ADAT
ADAT TO
mLAN
SPDIF TO
mLAN
MASTER CONTROL
The FIREstation can be set in stand-alone mode by pressing the Mixer
and ADAT buttons simultaneously. Stand-alone mode allows the
FIREstation to do two main things: act as an ADAT line mixer and
perform A/D and D/A conversion. The signal plugged into either the
ADAT I/O will be routed to the opposite set of analog ports. For
example, if a DigiMAX were plugged into the ADAT input, the same
signal would be sent to the TRS outputs. The line mixer would also
function, allowing the user to monitor all eight channels.
ADAT Input
Mixer
Line Outs
Analog ADAT Out
NOTE: When using the FIREstation as an Analog to Digital (A-D)
converter, the line mixer does not contain the analog inputs, just the
ADAT inputs.