PreSonus FIREstation User Manual
Page 30
24
5.9 Footswitch Input
The footswitch on the back of the unit allows the user/engineer to start
and stop recording at any desired moment. Every different software
manufacturer requires a different setup for use of this footswitch
receptacle. Please consult your software manufacturers manual,
website, or customer support for proper setup of this feature. The
FIREstation does not come equipped with a footswitch, it must be
purchased separately.
NOTE: The footswitch operates on Channel 16 with Controller 23 with
the Value set to 127.
5.10 TRS Line Ins/Outs
LINE OUTPUTS - TRS BALANCED
1
3
5
7
2
4
6
8
LINE INPUTS - TRS BALANCED
1
3
5
7
2
4
6
8
PREAMP
SEND - TRS
1
2
MAIN OUT
L
R
FOOTSWITCH
(Record Punch)
The TRS inputs and outputs are designed for use with balanced or
unbalanced 1/4” cables. Balanced cables have an extra conductor and
allow a signal to be sent over a longer distance while maintaining a
lower noise floor. The TRS line inputs for channels one and two take
precedent over preamp channels one and two. This is done so that
another device may be placed between the preamp sends and the TRS
line inputs.