Stewart Audio AV50-1 - Manual (Page 11)

6.2.3 Packaging Instructions (cont.)
1. Please write the RA number on three sides of the box. Include the
Stewart Audio RA number inside the box and a brief description of
the problem.
2. Do not ship any accessories (manuals, cords, hardware, etc.) with
your unit. These items are not needed to service your product.
Stewart Audio will not be held responsible for these items if they
are returned with the amplifiers.
3. When shipping your amplifier, it is important that it has adequate
protection. We recommend you use the original packing material
when returning the product for repair. If you do not have the origi-
nal box, see number 4.
4. If you provide your own shipping pack, the minimum recom-
mended requirements for materials are as follows:
a. 275 P.S.I. burst test, Double-Wall carton that allows for 2-
inch solid Styrofoam on all six sides of unit or 3 inches of
plastic bubble wrap on all six sides of unit.
b. Securely seal the package with an adequate carton sealing
tape.
c. Do not use light boxes or “peanuts”.
NOTE: Damage caused by poor packaging will not be covered
under warranty.
6.2.4 Estimate Approval
An estimate for all non-warranty repairs will be provided to the cus-
tomer once the unit has been shipped to the factory. The customer is
responsible to approve this estimate within 7 days. If the repairs are
not approved within 14 days, Stewart Audio reserves the right to con-
sider the unit scrap and may discard it.
6.2.5 Payment of Non-Warranty Repairs
Payment for non-warranty repairs must be submitted to Stewart Audio
before the product will be returned to the customer.
Stewart Audio Product Line
For more information, contact
[email protected]
DA70-2 70W x 2 @ 4 Ohms
35W x 2 @ 8 Ohms
DA70-4 70W x 4 @ 4 Ohms
35W x 4 @ 8 Ohms
DA770-2 80W x 2 Constant Voltage
70.7V rms out
PA50B 50W x 2 @ 4 Ohms
25W x 2 @ 8 Ohms
100W x 1 @ 8 Ohms bridged
PA100B 90W x 2 @ 4 Ohms
50W x 2 @ 8 Ohms
180W x 1 @ 8 Ohm bridged
World 600 190W x 2 @ 4 Ohms
110W x 2 @ 8 Ohms
World 1.2 350W x 2 @ 4 Ohms
200W x 2 @ 8 Ohms
World 1.6 550W x 2 @ 4 Ohms
300W x 2 @ 8 Ohms
World 2.1 650W x 2 @ 4 Ohms
400W x 2 @ 8 Ohms
CVA7400 200W x 2 Constant Voltage
70.7V rms out
CVA7800 400W x 2 Constant Voltage
70.7V rms out
World 600R Recessed controls
World 1.2R Recessed controls
Custom Amps Contact factory
AV50 50W @ 4 Ohms
25W @ 8 Ohms
100W @ 8 Ohms bridged
PA100B
Sub-Compact Products
AV 25-2 35W x 2 @ 4 Ohms
25W x 2 @ 8 Ohms CVA 25-1 25W x1 @ 25V/70V
CVA 50-1 50W x1 @ 25V/70V
19 20