Stewart Audio CVA50-1 Priority PA - Manual (Page 4)

6
2 Setup
2.1 Setup Precautions
CAUTION: Before installing your amplifier, make sure that
you have read the Important Safety Precautions at the be-
ginning of this manual.
2.2 Amplifier Installation
The CVA50-1 Priority PA incorporates a number of different mounting
options in order to fit your installation needs.
2.2.1 Pole-Mount Installation
The CVA50-1 Priority PA amplifier casing has mount holes on both the
top as well as the side of the unit which can be used with the AV-Pole
bracket available from Stewart Audio. Two screws are included in the
kit which will affix the bracket to the top or side of the unit.
Part Number: AV-Pole
7
2.2.1 Universal-Mount Installation
The CVA50-1 Priority PA also has a universal bracket available which
allows the unit to be mounted against a wall or under a table. Two
screws are included in the kit which will affix the bracket to the top or
the side of the unit. Once this is done, two holes are available for
mounting the unit where desired.
CAUTION: Use only the screws provided in mounting
brackets to the amplifier. Do not over-tighten.