Nematron M-Series Monitors - Manual (Page 21)

21
OSD Menus and Settings
MAIN MENU
The following section describes the monitor’s OSD menus and settings. With the monitor
powered up and receiving a normal video signal, pressing the MENU button once will cause the following
screen to appear:
Pressing MENU again will turn this screen off. Alternatively it will turn off after a time out period
that is set in the SET UP sub-menu. Finally it can be turned off by pressing the DOWN button to move the
blue highlighted band down to the EXIT sub-menu and pressing the SELECT button.
The bottom line on this screen displays the incoming video horizontal and vertical resolution and
refresh rates.
BRIGHTNESS/CONTRAST
BRIGHTNESS
With BRIGHTNESS/CONTRAST highlighted on the MAIN MENU pressing SELECT will cause
the following screen to be displayed: