Nematron M-Series Monitors - Manual (Page 25)

25
HORIZONTAL
With HORIZONTAL highlighted on the POSITION menu, pressing SELECT will cause the
following screen to be displayed:
Pressing the UP button causes the screen to move to the right while pressing the DOWN button
causes the screen to move to the left. A setting number in the range of 0 to 100 is displayed. Pressing
SELECT again will deselect the HORIZONTAL menu option and the setting will be saved.
VERTICAL
With VERTICAL highlighted on the POSITION menu, pressing SELECT will display the
VERTICAL adjustment menu. Pressing UP will cause the screen to move upward and pressing DOWN
will cause the screen to move downward. A setting number in the range of 0 to 100 is displayed. Pressing
SELECT again will deselect the VERTICAL adjustment menu and the setting will be saved.
CLOCK
With CLOCK highlighted on the POSITION menu, pressing SELECT will display the CLOCK
adjustment menu. Pressing UP increases the CLOCK and causes the screen to increase in width.
Pressing the DOWN button causes the CLOCK to decrease and the screen to reduce in width. A setting
number in the range of 0 to 100 is displayed. Pressing SELECT again will deselect the CLOCK
adjustment menu and the setting will be saved. Adjustment of this setting is normally not needed as it is
automatically set to its optimum setting each time the monitor is turned on or when AUTO ADJUSTMENT
is selected.
PHASE
With PHASE highlighted on the POSITION menu, pressing SELECT will display the PHASE
adjustment menu. Pressing UP increases the PHASE. Pressing the DOWN button causes the PHASE to
decrease. A setting number in the range of 0 to 100 is displayed. Pressing SELECT again will deselect
the PHASE adjustment menu and the setting will be saved. Adjustment of this setting is normally not
needed as it is automatically set to its optimum setting each time the monitor is turned on or when AUTO
ADJUSTMENT is selected.