STI 6700 - Manual

Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
INSTALLATION OF STI BREAK GLASS STOPPERS® STI-4100, STI-6100 AND STI-6700
All specifications and information shown were current as of publication and are subject to change without notice.
Electronic warranty form at www.sti-usa.com/wc14
4100/6100IS OCT07
VIEW OF GLASS PLACEMENT
INSTALLATION NOTES
1. Using frame as a template, mark four (4) holes for installation.
2. Drill four (4) 1/4 in. holes approximately 1 1/4 in. deep.
3. Insert four (4) anchors (provided) into mounting holes.
4. Install break glass tool inside of mounting frame.
5. Place mounting frame with break glass tool installed and
conduit spacer (if used - only in some STI-4100 installations)
over pull station.
6. Tighten mounting screws (provided) in mounting holes.
7. Place cover and glass assembly over mounting frame.
8. Tighten 19001 allen head screw at bottom of cover.
MOUNTING FRAME
INSERT PLASTIC KNOCK-OUT INTO SPACER
NOTCH IF CONDUIT IS NOT NEEDED
(2) PROVIDED
SUB-08 BREAK GLASS TOOL
SINGLE STRENGTH GLASS
SUB-09 FOR STI-6100
SUB-10 FOR STI-4100
SUB-67 FOR STI-6700 PRINTED
WITH “BREAK GLASS” ONLY
POLYCARBONATE
COVER
19001 ALLEN HEAD SCREW
STI-3100-R CONDUIT SPACER
(FOR USE WITH STI-4100 ONLY)
19033 PLASTIC ANCHOR
(4) PROVIDED
19013 #10 x 1 1/2 in. PHIL PAN HEAD
(4) PROVIDED
19003 WALL HOOK
STI-6700 MODEL ONLY
TOP TAB
INCLUDED
WITH
STI-4100
ONLY
9 in.
(229mm)
6.25 in.
(159mm)
5.39 in.
(136mm)
6.84 in.
(173 mm)
4.96 in.
(126mm)
8.5 in.
(216mm)
1.5 in.
(38mm)
2 in.
(51mm)
2.43 in.
(62mm)
COVER SPACER FRAME
CABLE FRAME
CABLE RETAINER MUST BE
INSERTED IN FRAME NOTCH
PRIOR TO SECURING FRAME
TO WALL
HOLD DOWN TAB
STI-4100 (4) PROVIDED
STI-6100 AND STI-6700 (3) PROVIDED
COVER
GLASS
7 in.
(178mm)
4.75 in.
(121mm)
5.41 in.
(137mm)
1.5 in.
(38mm)
6.625 in.
(168mm)
4.16 in.
(106mm)
3.97 in.
(100mm)
STI-6100 and STI-6700
1.66 in.
(42mm)
COVER FRAME
PRODUCT DIMENSIONS
STI-4100 and STI-3100-R (SPACER)
BREAK GLASS TOOL INSTALLATION