Component descriptions (top side) – STI 6200WIR8 User Manual

Page 3

Advertising
background image

— 3 —

COMPONENT DESCRIPTIONS (Top Side)

Switches (1- 8) - For reference, information is also written on the RECEIVER case (located under Zone ID list).
1 - MIRROR MASTER OFF/ON
2 - NORMAL/ENROLL
3 - AUTO RESTORE/LATCH
4 - SIREN TIME/MIRROR#
5 - SIREN TIME/MIRROR#
6 - CHIME OFF/ON
7 - NORMAL/DELETE
8 - MIRROR SLAVE OFF/ON

Push Button - Selects zone to enroll or delete, acknowledge latched alert (resets LED to GREEN), silences alarm.

LEDs (1- 8) - Each enrolled SENSOR or mirrored RECEIVER has an LED that indicates the current state of that
zone from the top LED (Zone 1) down to the bottom LED (Zone 8). The zone states, in order of precedence, are:

• LED RED = zone alarm

• LED RED (flashing) = zone latched (zone was in alarm and returned to normal)

• LED AMBER = SENSOR trouble (battery or SENSOR tamper trouble detected)

• LED GREEN = zone normal

• LED off = zone not enrolled

Sounder - Audio feedback for siren, chime/ beeps, zone enrollment and deletion.

DESCRIPTION

ON (Switch UP)

OFF (Switch DOWN)

SW1

MASTER RECEIVER SETTING

ENABLED

DISABLED

(Only active when SW8 = ON)

Switch on only for Mirror Master

Switch off if not Mirror Master

SW2

ENROLL DEVICES

ENABLED

DISABLED

LED for zone number waiting to enroll blinks. Normal Operation

Button used to change zone to be enrolled.

SW3

ALARM LATCHING

ENABLED

DISABLED

(Only active while

LED turns on when triggered

LED turns on when triggered

SENSOR is being enrolled) Button press turns off siren

LED flashes when restored

LED turns off when restored

Second button press turns off LED flashing

SW4

RECEIVER # / SIREN TIME

RECEIVER# (when SW8 = ON)

SIREN TIME (when SW8 = OFF)

and

Note: Siren can turn off upon button press.

ON = 1

(SW4)(SW5) 00 = Mirror #1

(SW4)(SW5)

00 = 0 Second (Silent)

OFF = 0

10 = Mirror #2

10 = 30 Seconds

01 = Mirror #3

01 = 180 Seconds

11 = Mirror #4

11 = Continuously ON

SW6

RECEIVER CHIME

ENABLED

DISABLED

Chime sounds a double beep

Chime does not sound when

when device is triggered.

device is triggered.

SW7

DELETE DEVICES

ENABLED

DISABLED

All LEDs turn red. LED blinks for zone to be Normal Operation

deleted. Hold button for 5 seconds to delete.

Hold button another 5 seconds to delete all.

SW8

MIRROR MODE

ENABLED

DISABLED

Enables Mirror Mode. Enables SW1.

Disables Mirror Mode. Disables SW1.

SW4/5 indicate RECEIVER#.

SW4/5 indicate ALARM TIME.

Turns on RECEIVER# (SW4/5) transmissions. Turns off mirrored transmissions.

SW5

Switch #

SIREN

SW4

SW5

TIME

MIRROR #


OFF OFF DISABLED

1

ON

OFF

30 SEC

2

OFF

ON

180 SEC

3

ON

ON

ON CONT

4

Advertising
This manual is related to the following products: