The heat indicator, Thermostat control – AGA ELECTRIC RANGE EC LM-2 User Manual

Page 12

Advertising
background image

12

BLACK

SILVER

too high

too low

correct amount of

stored heat

RED

BLACK LINE

The heat indicator is above the roasting oven door and has three sections: black, silver and red. When the indicator is on
or about the black line in the silver section, the range is at the correct working temperature. The purpose of the heat
indicator is to show whether the range contains the full amount of stored heat and it should, therefore, only be referred to
first thing in the morning or after a period of several hours during which no cooking has been done.

NOTE: IT DOES NOT INDICATE THE OVEN TEMPERATURE.

THE HEAT INDICATOR

To turn the range off, switch off the electricity supply at the wall.

When the range is in use, the control knob should be in the upper section of the numbered band (See Fig. 3), with the
indicator on or about the black line in the silver section of the heat indicator (see above). It may be necessary to adjust the
control knob slightly to achieve this.

Once the correct setting has been confirmed, the control will operate automatically to maintain the range at the correct
temperature and need not be adjusted.

THERMOSTAT CONTROL

DESN 513468

Fig. 3

Advertising