Agri-Fab 45-0320 - Manual (Page 9)

9
7. (Figure 17) Insert the bag frame strap into the stitched (Figure 17) (Figure 17)
sleeve along the front edge of the bag bottom.
8. (Figure 17) Assemble the bag frame strap to the lower (Figure 17) (Figure 17)
hopper side tubes using two 1/4" x 1-1/8" clevis pins
(T) and 3/32" hair cotter pins (R).
SNAP
FLAP
9. (Figure 18) Secure the bag corners around the lower (Figure 18) (Figure 18)
hopper side tubes by snapping the bag fl aps to the bag
bottom on both sides.
4. (Figure 15) Turn the second rear hopper tube so that the (Figure 15) (Figure 15)
brace holes in the middle of the tube
face up. Assemble
the ends of the rear hopper tube onto the ends of the
lower hopper side tubes. Fasten together using plastic
plugs (CC).
5. (Figure 16) Place the assembled lower hopper tubes (Figure 16) (Figure 16)
into the bottom of the hopper bag
6. (Figure 16) Attach the ends of the lower hopper side (Figure 16) (Figure 16)
tubes to the
inside of the upper hopper side tubes using
two 3/8" x 1/2" clevis pins (S) inserted from the inside,
and two 3/32" hair cotter pins (R).
LOWER
HOPPER
SIDE TUBE
PLASTIC PLUG (CC)
REAR HOPPER TUBE
(brace holes on top) 15
16
LOWER HOPPER
SIDE TUBE
HOPPER BAG
BOTTOM
UPPER HOPPER
SIDE TUBE
3/8" x 1/2"
CLEVIS PIN (S)
3/32" HAIR
COTTER PIN (R)
17
1/4" x 1-1/8"
CLEVIS PIN (T)
3/32" HAIR
COTTER PIN (R)
BAG FRAME STRAP
18
ENGLISH