STI LT-1 - Manual

NOTE:
It is important to read, understand and follow all instructions provided with this
product. It is the installer’s responsibility to comply with NFPA 70, 72 & 101, NEC,
mounting specifications according to ADA and other applicable codes. This product is
not to be used in place of panic hardware. To avoid electrical shock, DO NOT attempt
to install this product when power is on. After installation and testing are complete,
provide a copy of this manual to all personnel responsible for testing and maintenance
of this product.
STI LATCHING/TIMER MODEL LT-1
RELAY ACTIVE LED RED
POWER LED GREEN
1.28 in.
33mm
1.74 in.
44mm
.632 in.
16mm
+
- *POWER IN
12 - 24 VAC/VDC, 18 mA
TIMER
CONTROL
FORM “C”
DRY CONTACTS
3A, 30VDC
RESET
INPUT COM
TRIGGER
N.C.
COM
N.O.
1