Boltek EFM-INV3 - Manual (Page 7)

10/10/2012
(C) 2012 BOLTEK CORP EFM-INV_Instruction_1.2
PIPE WRENCH TIGHTENING BULKHEAD ONTO MAST (HAND TIGHT +4 TURNS WITH WRENCH)
COAT PIPE THREADS WITH SILICONE GREASE.
FAILURE TO PROPERLY TIGHTEN BULKHEAD ONTO MAST WILL RESULT IN WATER DAMAGE
TO FIELD MILL NOT COVERED BY WARRANTY
READY FOR THE FIELD MILL TO BE CONNECTED
REFER TO THE EFM-100/200 DOCUMENTATION FOR DETAILS ON CONNECTING AND
GROUNDING YOUR FIELD MILL