Brocade FastIron Ethernet Switch Administration Guide - Manual (Page 158)

Hdr syntax: 0, Chksum error: 0, Encaps failed: 0
No memory: 0, Invalid packet: 0, Fragmented: 0
Internal errors: 0
Syntax: show fdp traffic
Clearing FDP and CDP information
You can clear the following FDP and CDP information:
• Information received in FDP and CDP updates
• FDP and CDP statistics
The same commands clear information for both FDP and CDP.
Clearing FDP and CDP neighbor information
To clear the information received in FDP and CDP updates from neighboring devices, enter the
following command.
device# clear fdp table
Syntax: clear fdp table
NOTE
This command clears all the updates for FDP and CDP.
Clearing FDP and CDP statistics
To clear FDP and CDP statistics, enter the following command.
device# clear fdp counters
Syntax: clear fdp counters
CDP packets
Cisco Discovery Protocol (CDP) packets are used by Cisco devices to advertise themselves to other
Cisco devices. By default, Brocade devices forward these packets without examining their contents.
You can configure a Brocade device to intercept and display the contents of CDP packets. This
feature is useful for learning device and interface information for Cisco devices in the network.
Brocade devices support intercepting and interpreting CDP version 1 and version 2 packets.
NOTE
The Brocade device can interpret only the information fields that are common to both CDP version 1
and CDP version 2.
Clearing FDP and CDP information
158 FastIron Ethernet Switch Administration Guide
53-1003075-02