Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 404)

372 Network OS NETCONF Operations Guide
53-1003231-02
Configuring all xSTP on DCB interface ports
24
Disabling spanning tree
By default, spanning tree is disabled.
To disable spanning tree on the DCB interface, perform the following steps.
1. Issue the <edit-config> RPC to configure the interface node in the
urn:brocade.com:mgmt:brocade-interface namespace.
2. Under the <interface> node, include the <gigabitethernet>, <tengigabitethernet>,
<fortygigabitethernet>, <hundredgigabitethernet>, or <port-channel> node element.
3. Under the <gigabitethernet>, <tengigabitethernet>, <fortygigabitethernet>,
<hundredgigabitethernet>, or <port-channel> node element, include the following elements.
a. In the <name> element, specify the interface name in [rbridge-id/]slot/port format or
port-channel number.
b. In the <shutdown> element, include the delete operation in the element tag to enable the
port.
c. Include the <spanning-tree> node element, which resides in the
urn:brocade.com:mgmt:brocade-xstp namespace.
4. Under the <spanning-tree> node, include the empty <shutdown> leaf element to disable
spanning tree on the port.
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="2042" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
<target>
<running/>
</target>
<config>
<interface xmlns="urn:brocade.com:mgmt:brocade-interface">
<tengigabitethernet>
<name>22/0/1</name>
<shutdown xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
operation="delete"/>
<spanning-tree xmlns="urn:brocade.com:mgmt:brocade-xstp">
<shutdown/>
</spanning-tree>
</tengigabitethernet>
</interface>
</config>
</edit-config>
</rpc>
<rpc-reply message-id="2042" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<ok/>
</rpc-reply>