Brocade Network OS NETCONF Operations Guide v4.1.1 - Manual (Page 598)

566 Network OS NETCONF Operations Guide
53-1003231-02
Monitoring IGMP snooping
38
<ip>
<igmp
xmlns="urn:brocade.com:mgmt:brocade-igmp-snooping">
<query-interval>125</query-interval>
</igmp>
</ip>
</vlan>
</interface>
</interface-vlan>
</config>
</edit-config>
</rpc>
<rpc-reply message-id="3001" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<ok/>
</rpc-reply>
Monitoring IGMP snooping
Monitoring the performance of your IGMP traffic allows you to diagnose any potential issues on
your switch. This helps you utilize bandwidth more efficiently by setting the switch to forward IP
multicast traffic only to connected hosts that request multicast traffic.
Use the <get-config> RPC to validate configuration settings. IGMP parameters are defined in the
brocade-igmp-snooping YANG module. For details, refer to the Network OS YANG Reference
Manual.