Brocade VDX 8770-4 Four-Post Flush Mount Rack Kit Installation Procedure - Manual (Page 4)

6 of 10 Brocade VDX 8770-4 Four-Post Flush Mount Rack Kit Installation Procedure
Publication Number: 53-1002669-01
Tools required
The following tools are required when installing the rack mount kit:
• Torque wrench with #2 Phillips screwdriver tip
• Flathead screwdriver
• Hydraulic or assisted lift with a minimum raise of 140 cm (55 in.) and a minimum capacity of 113 kg (250 lbs).
Parts list
See Figure 1 for the parts list.
FIGURE 1 VDX 8770-4 four-post flush mount rail kit parts
1 Left rail 5 Alignment washer for racks that have rails with square holes 4)
2 Right rail 6 Clip nuts (14)
3 10-32 x .31 in. (.79 cm) Phillips screw (16) 7 Retainer nuts (14)
4 10-32 x .63 in.(1.60 cm) Phillips screw with square cone
washer for racks that have rails with round holes (18) 8 Adjusting screw locations
6-32 x .25 in. (.635 cm) Phillips screw with patchlock (2)